Faux Shiplap Kitchen Island

When we decided to panel the island I thought we would be super organized and get it done quick since we had already done Waylen’s room. (You can check that project out HERE.) Now we actually did finish it quickly but OH MY GOSH did we make the stupidest mistakes along the way. First, we took Chappy car (TWICE) to Lowes instead of my truck to get the wood. Like how dumb can we be???? Ha 

We had decided to prep the wood the weekend before so we bought it, had lowes cut it down to size, and then I painted it with two coats of white. For this project we purchased two sheets of birch plywood and wanted them to be 6 and 3/4″ strips. Key word .. wanted .. 

Sounds good enough right? Wrong… Chappy had them cut the strips to the wrong size soo alllllllllll that prep work went out the door when we had to go buy new wood. Ha Luckily we will eventually be shiplapping the powder room and we can use the wood in there so it’s not a complete loss. 

(Note: we didn’t haveeeee to get new wood but we planned the size so we wouldn’t have to cut around our countertop supports so it would be an easier fit.) 

I was not about to lose another weekend prepping wood so once we got the new pieces we just dove right in and started putting it up instead of painting it first. 

We started at the top and worked our way down making sure to cut the corner piece edges at 45 degree angles.


We used wood glue and a few nails to hold everything in place and had to insert two outlet extenders. (Remember to cut the power first!) After all the wood was up we sanded the corners so they wouldn’t be so sharp, painted it white, and then caulked the top, bottom, and sides.



We did the entire project over the weekend while Waylen slept! If we didn’t have an adorable babe to entertain we definitely could have knocked the entire project out in one day it was really that quick! 

Before: 


After:

Advertisements